Instructions on how to tie a fishing lead correctly

Since ancient times, when people went fishing, they knew how to make use of rocks tied to fishing lines, supporting the bait to sink into the water. But over time, modern life with the appearance of metal, lead material is known to be a great step forward to make fishing trips much simpler.

Lead is chosen over other metals probably because of its characteristic advantages such as: soft, heavy, non-oxidizing, no chemical reaction, easy to melt, easy to cast, easy to mount, low cost. , durable. Not only that, it also supports the angler to throw the bait far, standing still as desired. There are many different ways to tie a lead, but the following will be the simplest:

Step 1: The first thing you need to do is thread the fishing line through the eyelets fixed at the lead, removable eyelets or lead holes.

Step 2: continue to thread the line a second time, after completing step one, then to this step two, you continue to thread another round of fishing line through the lead eyelet or lead hole. Use your hands to tighten the line to form a loop that embraces the lead ring or the lead ball.

Step 3: create a knot to fix the lead by using the end of the rope to wind it up to create a knot close to the lead, then pull it to tighten the bun more firmly.

Step 4: so you have fixed the lead in front of the hook, helping to attach the bottom bait hook. This is a fixed type, can not slide up and down.

Instructions for using fishing rods

As mentioned above, ball-shaped fishing lead is a type of fishing lead that has the same appearance as a small ball but has a groove in the middle. With the main weight from 0.4g to 28g, depending on the different instructions for use, it is applicable to the fishing situation and the corresponding fishing technique. It's still better to use the appropriate lead weight for any type of sentence, too heavy or too light is not okay.

Mounting a ballpoint lead is very simple. You can tie the lead radial or put a regular clamp, clamp it on the hook. Not only that, the rubber groove in the middle can also be pulled up and down flexibly. According to the instructions, attach the lead so that the bait is suspended and stable in the water.

Instructions for using bullet fishing lead

The bullet lead has two options for anglers to mount on the fishing line: one is tied at the top, the other is tied at the bottom. With this warhead lead structure, you can't use radial warheads. True to its name, when you tie a fishing lead, the sharp warhead should point downward, the cross-section with the water surface is small, the contact is not too large for the lead head to go deeper under the water.

The shape of the cone helps this fishing accessory slide through moss easily, without getting caught in obstacles. When used, the bullet lead is suitable for use with live bait, instead of glide lead. But the application of this lead is to use fishing rods with caroline and texas, weighing from 3.5g to 28g.

Instructions for using rubber lead

The shape of the rubber lead resembles a hair seed, the two sides of the head are fixed with rubber. In the middle of the lead, there is a rubber clamp groove design that has the function of twisting, twisting the wire when it is clamped into the right position or turning it back to remove it from the wire. The flexibility of this lead is very high. Using two rubber clamps on both sides makes the height adjustment easy as well as quick replacement in case of need. Usually this lead is used with live bait or add a gill line to help the bait sink deeper in the water. Weight from 1.7g to 42g, used in case of needing extra weight.

Hopefully the above information about fishing lead will help you gain more useful knowledge for your upcoming fishing trip. If you want to fish effectively, you must ask the angler to be patient, prepare yourself carefully with the best accessories. Hope you will have the best choice for your fishing rod, support the fishing session to be more successful, collect a lot of loot.